Fully Automatic Movable Walls Operable Partitions more than 6000mm high
Specifications for the Operable Partitions (Movable Walls)
As the partition is opened and closed, the horizontal seals (sealing strips) of the individual elements extend and retract Automatically by Electric Motor. The Power supply is conducted from element to element via end - face plug contacts. The system connected to the mains supply via a plug in power supply unit and a central master switch. Protective function provided by electronic overload relays. For safety reasons, mechanical limit switches will not be permitted. In order to ensure functional efficiency even in the event of power failure/malfunction, an emergency unlocking device is provided for all elements.
Construction details
Frame Construction:
To be torsionally stiff aluminium and steel tubular profiles.
Fascia Boards:
The Surface Panels/Fascia Boards are clipped on as freely oscillating panels to offer optimum sound insulation. The Fascia is removable without taking down the Movable Wall Element.
Element Interconnection:
The panels are inter connected by means of positive locking and unlocking covered aluminium sections engaged with each other by integrated magnetic strips, which have a linear attraction of 40 N/m. The individual panels are centered via the magnetic strips to guarantee sound positive locking and sealing. No visible metal parts when wall is opened or closed. Additional vertical lip
seals needed at the element connection. Panels have protective edge profiles inserted into grooves on the edges of the elements so that the profiles are not visible when the wall is closed.
Extensible Strip Seals (Sound Seals):
Retractable seals are provided on all panels. Seals is quick set and spring loaded to overcome any deflection upon the limits of bottom seal clearance.
Floor clearance is based on floor variances and allowed live load deflection of overhead structure and floor system.
The minimum bottom seal clearance is 50mm. Submit bottom clearances for the system depending on the span and height on the relevant shop drawings for approval by the Engineer.
In order to ensure optimum vertical sealing between the extended sealing strips, the sealing strip end elements are in the form of polyurethane mouldings.
Telescopic Element:
The final closing element of the partition in each case are designed as a Telescopic compensating element. Its function is ensured over its full height by means of a Triple action electrically activated spindle/lever drive mechanism. Construction elements such as folding flaps are not permissible. The compensating component are constructed from identical material with that of the Main Partition. To ensure flush closing of the partition, the contact pressure is adjustable between 0 to 1000N. Bulb seal closures are not used.
Wall panel thickness:
Panels are not less than 100mm. No Multiple splices except for shipping constraints.
Element Adjustment:
It is possible to marginally adjust the height of each element in order to compensate for any unevenness without opening the ceiling or the element. In case of surface damages or redecoration the face panels is removable without taking down the whole element.
Pass door elements:
Pass door elements where required are 100 mm with a portal frame consisting of rigid steel profiles and two side posts with pressure tubes. Additional interlocking and centering of door stiles via automatically operated floor pins. Door leaf is flush with face of wall. Door leaf consists of steel frame and automatically operated retractable floor seal. Sealing mechanism (top seal and floor plugs) is operated at the edge of the element with integrated door leaf mechanism with no additional manual operation.
SUSPENSION SYSTEM - FOR PARTITIONS MORE THAN 6000MM HIGH
The ceiling track is fixed to an adjustable steel suspension of threaded rods. The adjustability of the steel suspension ensures that eventual deflection of the ceiling can be absorbed. The materials are protected against corrosion.
All Steel heavy duty track system along with Steel Rolling Carrier Trolley arrangement is equipped with direction tongue mechanism at switches/curves to facilitate self sorting/directing
program for tall Elements.
Minimum 4.5mm roll formed steel. Static loading of track with brackets show no failure of track or brackets at 2000KG.
Track is supported by adjustable steel hanger brackets connected to the Structural Supports.
The panel with the track and trolley system confirming no deflection, flaking or failure of the trolley after a period of 50,000 completed cycles is provided on request.
Two all steel trolleys with steel tired ball bearings. Non steel tires not provided. Suspension system provide automatic indexing of panels into stack area using pre-programmed switches and trolleys without electrical, pneumatic or mechanical activation.
Right angled aluminium tracks with polymer trolleys are not provided.
A performance Warranty of 10 years are provided for the performance of Tracks, Brackets, Switches and Curves.
TRACK RAIL SYSTEM - FOR PARTITIONS UPTO 6000MM HIGH
The track is absolutely maintenance-free. Intersections, T-junctions and corner elements are closed-die forgings and equipped with support roller assemblies. In order to ensure the easy
operability of the elements, including at track junctions and in the stacking/parking area, rolling friction are ensured at all points along the track.
The dampening track roller assemblies are used to prevent the transmission impact forces and operating noise, which protect the Element, Rail and Carrier.
Shop Drawings:
Show location and extent of operable partitions. Include plans, elevations, sections, details, attachments to other construction, and accessories. Indicate dimensions, weights, conditions
at openings, and at storage areas, and required installation, storage, and operating clearances. Indicate location and installation requirements for hardware and track, including floor tolerances
required and direction of travel.
ACOUSTIC: Comply with Acoustic Report.
FIRE RESISTANCE: All requirements for resistance of fire are in accordance with the Fire Strategy Report.
QUALITY ASSURANCE
Load & Stress testing of the Track System confirming that the load capacity of their tracks is not less than 1200 Kg/LM.
Trolley/Roller Assemblies
confirming that the load capacity of the trolleys is not less than 600 Kg/trolley
The panel with the track & trolley system confirming no deflection, flaking or grooving of the track and no signs of fatigue or failure of the trolley after a period of 50,000 completed cycles.
Packing and delivery
Company Introduction
As manufacturing factory headquartered in guangzhou, an important port city of China's foreign trade, Guangzhou CN Electrical Equipment Co., Ltd. is a high-tech enterprise which integrating R&D, Manufacturing and Trading, one of the leading and exclusive manufacturer of Automatic Partitions and Automatic Doors and the only company in China which has a dedicated manufacturing plant of electrically operated vertical lift folding partition Walls in China.
Our factory covers an area of more than 12,000 square meters. We have our products installations throughout china and abroad. The annual manufacturing capacity to 500 sets of various automatic revolving doors and 10,000 square meters of motorized partition walls, we have produced and installed Automatic Doors and Electrical Movable Walls for all types of establishments like high end residences / conference room / banquet halls in hotels / auditorium / convention centre / meeting rooms / board rooms / training rooms etc.
All the materials used are in compliance to international standards such as ISO 9001, CE, IEC etc. With the strictly control for designed, production, inspection and services by our advanced quality management system, enable the products of Guangzhou CN Electrical Device Co., Ltd selling well in the domestic market, and keep rapid growth in the European, American, Asia and Middle East market. Successfully established strategic cooperative partnership with famous domestic and foreign enterprises like Siemens, Phillips, and BEA etc.
Factory Details
Our factory is equipped with state of the art hydraulic press brake bending machines, automatic cutting machines for cutting aluminium and MDF boards and complete equipment like drilling, milling, bearing and lamination press machines, processing and manufacturing any type of doors and movable walls as per customer choice.
FAQs
Q: Are you trading company or manufacturer?
A: We are automatic door manufacturer for many years.
Q: How long is your delivery time?
A: Standard products within 10-15 days after received 50% deposit. Customized products depend on agreement.
Q: Do you provide samples ? is it free or extra?
A: Free samples can only be provided if the order is large enough. A small quantity can only be a trial order.
Q: What is your terms of payment?
A: 30% -50%deposit and balance before shipment, T/T, Western Union or Cash accepted.
){kind=link}