Upward Bifold Doors Vertical Lift Bi-fold Doors and Vertical Walls
Vertical lift folding wall systems
Vertical Lift Bifold Doors and Vertical Walls
The Vertical Lift Bifold Doors or upward acting Bifold Doors, vertically folding operable wall systems and Quad Panel doors, each door is designed and manufactured individually using precise mathematical calculations to achieve exact counterweight balance for safety, balance and appearance. When opening, the door folds along a central hinge and moves upward, coming to rest in horizontal configuration immediately below the lintel.
The vertically folding glass wall systems are more than functional, they are an artistic extension of your overall design.
Standard Design
Systems are constructed from rectangular structural steel sections and designed for minimum deflection in the open and closed position.
Operation:
When opening, this two leaf overhead folding system folds along a central hinge and moves upward, coming to rest in a horizontal configuration immediately below the header.
Size:
Maximum width: 30 meters
Maximum height: 9 meters
Cladding
Customer Specified
Customized cladding options provide the ability to meet the customers intent.
Finishes
Powder coated, custom color matches upon special request
Operation: Electrical operator(Standard)
Motorizes by 110 volt / 8 amps motor system
Optional manual operated
Operated by hand without special cranks or tools.
Door leaf thickness: 160 mm
Guide rails material: Aluminium
Seals: Bottom, side and top seal
Operating speed: 0.2 - 0.3 m/s
Wind load resistance: 0.7 - 1.6 kPa depending on size (* Higher wind loads on request.)
Sound reduction (standard): 15 dB
Operating environment temperature range: -35°C to +70°C
Little headroom is necessary for this type of door.
The doors accept a wide range of cladding and/or glazing materials and come in many colors to suit your design intent.
When opening, the door folds along a central hinge and moves upward, coming to rest in horizontal configuration immediately below the header.
Dimensions of the doors vary according to the application and each door is individually designed.
Door system is suitable for opening sizes up to 30 meters wide and 9 meters tall.
Wind loading can be a critical design factor especially in hurricane prone areas unless otherwise
specified the doors are designed to resist a minimum wind loading of IO psf.
This door suits high security and high wind load applications.
Company Introduction
As manufacturing factory headquartered in guangzhou, an important port city of China's foreign trade, Guangzhou CN Electrical Equipment Co., Ltd. is a high-tech enterprise which integrating R&D, Manufacturing and Trading, one of the leading and exclusive manufacturer of Automatic Partitions and Automatic Doors and the only company in China which has a dedicated manufacturing plant of electrically operated vertical lift folding partition Walls in China.
Our factory covers an area of more than 12,000 square meters. We have our products installations throughout china and abroad. The annual manufacturing capacity to 500 sets of various automatic revolving doors and 10,000 square meters of motorized partition walls, we have produced and installed Automatic Doors and Electrical Movable Walls for all types of establishments like high end residences / conference room / banquet halls in hotels / auditorium / convention centre / meeting rooms / board rooms / training rooms etc.
All the materials used are in compliance to international standards such as ISO 9001, CE, IEC etc. With the strictly control for designed, production, inspection and services by our advanced quality management system, enable the products of Guangzhou CN Electrical Device Co., Ltd selling well in the domestic market, and keep rapid growth in the European, American, Asia and Middle East market. Successfully established strategic cooperative partnership with famous domestic and foreign enterprises like Siemens, Phillips, and BEA etc.
Factory Details
Our factory is equipped with state of the art hydraulic press brake bending machines, automatic cutting machines for cutting aluminium and MDF boards and complete equipment like drilling, milling, bearing and lamination press machines, processing and manufacturing any type of doors and movable walls as per customer choice.
FAQs
1.Q: Are you a manufacturer or trading company?
A: We are a manufacturer, our factory covers an area of about 12,000 square meters and the building area is more than 9,600 square meters.
2. Q: What is the price of the movable wall?
A: Our mobile wall system is customized, the cost is calculated by square meters, prices vary widely according to thickness of walls and surface finish requirements. Therefore, for acurate quotation we need detailed dimensions such as height, width and finish requirements. If possible, we also need your layout drawings.
3. Q: Is the movable partition acoustic (soundproof)?
A: Yes, our movable wall system is soundproof. We have different acoustic material fillings and various sound absorbing panels to achieve different acoustic ratings.
The partition panels comes in different thickness, and different acoustic rating from 36db to 50 db depending upon the project requirement. We can provide panels with raw MDF or any type of finish such as laminate, veneers, white boards, fabric, pin-boards, painted surfaces etc to compliment your bilding environment and decor.
4.Q: How to install mobile partitions?
A: We provide installation guide services or send technicians as required. We have very detailed drawings and videos showing how to install, so your employees just need to follow them step by step.
5.Q: What is your payment terms?
A : 30% - 50% of total amount by T/T as deposit when confirmed the order and balance paid by T/T before loading container, or irrevocable L/C at sight.
6. Q : What is your warranty ? What do we do in case of problems?
A : 3 years quality warranty is provided, including frame unfading nor peel-off, hardware and accessories working properly under correct operation. In case of our quality problem, we will provide replacement by international courier. Immediate delivery of replacement parts with available in stock, and if not stocking, the time should be depending on material ordering time which is normally 10-15 days.
7. Q : What you should do on site?
A : A beam / support steel structure should built on site for track installation.The min distance leaving for track installation from false ceiling to top ceiling is 300mm.
Tags:
vertical lift bi-fold door
Vertical Bifold Doors
vertical Bi-fold Door
Upward Bifold Doors
Vertical folding door
Vertically folding operable doors
Audited Supplier 
){kind=link}
){kind=link}