G180 Heavy type Automatic Sliding Door Operator System maximum 2000KG
G180 Heavy Type Automatic Door System is the heaviest type. The material that we use are all good quality. The motor has motor lock function, you can lock the door by our remote control when you need to lock the door. It's safety and convenient. They system pass CE Certification and 100 million tims operation test.
Features of automatic door opener G180
1. Wide input voltage range power management, low power consumption, energy saving
standby state
2. Intelligent microcomputer control system, various parameters can be adjusted flexibly.
3. Aluminum alloy track system (thickness: more than10mm), T5 strength, long using life,
low noise
4. Advanced brushless motor and turbine rod deceleration integration system, high
efficiency, high torque, long use life.
5. Unique self - lock function, without additional accessories, full - function remote control
device, safe and reliable
6. Safety sensor to ensure safe pass through
7. Variety way sensor activited to operate doors
8. When power failure, can choose backup power supply, to ensure the normal using of
the door
9. Self-locking function, when the door body security closed, keep closed state
10. Soft start, runs more smoothly
11. Safety, automatic protection, automatic reset
12. Low power consumption, energy-saving standby state.
13. Low noise power unit, easy to install and convenient.
14. Fault self-inspection, LED display fault code, convenient maintenance.
Soft start: In general when the automatic door open, the motor suddenly acceleration, the door not only swing more harm, and the noise is big. We use soft start technology, the motor start slowly and soft, ensure stable running and acceleration of door body .
Auto detect: When the door body hits person body or object, it will automatic retract quickly, when detect the obstacle is clean, it will run automatically again.
System automatic self protection: When obstacle 3-6 times detected, and confirmed that person or object still has not left, the door will auto-stop, to protect the security of the clamped object and door body. After obstacle is removed, press the reset switch and the door body resumed running again.
Automatic reset: After confirming the safety of the site, there is no need to switch the power supply. As long as the door is pushed to the opening position, the door will automatically resume running.
Motor lock: Locking force > 550N
Energy saving: Use the field current, instantaneous pressure technology, when the door is not moving the motor is not charged, when the door is pulled, the motor will have field current transferred to the controller, and the controller will give a strong reverse current on the motor in 0.01 seconds.
Suspension unit
All adopt adjustable structure, hanger parts are stamping formed by cold-rolled steel sheet, surface galvanized, high strength nylon materials, surface smooth, not easy to deform, highly consistent with guide rail, running smoothly.
Controller unit
Automatic door control hub use built-in microcomputer chip to receive the sensor detection signal, and the door can be automatically adjusted and set the control process according to the measured door size and weight through programming.
Wire connecting
According to the needs of the electrical components to provide mutual connection, safe and reliable, easy to operate.
Beam for driving device
Aluminum alloy profile (thickness ≥10mm). Strength T5, long operating life, good stability, low noise.
Belt tensioning wheel unit
The constant tension belt tensioning wheel is used to adjust the belt tension.The belt constant adjustment device keeps the constant tension of the tooth belt in sync.
Belt unit
Select used the synchronous gear belt with high transmission efficiency and driven by special motor for reciprocating motion. Connected with the hanger to drive the door movement.
Independent guide rail unit
Newly designed independent guide rail device, easy to replace and repair. The dynamic beam and guide rail are interlining with high quality rubber strip, which can absorb the vibration and noise generated in the operation stably and reliably, and create a quieter operation environment.
Motor unit
The 24v 300w synchronous brush-less motor is integrated with the worm reducer.
| Feature |
Heavy Duty |
| Door Open |
Single Open, Double Open |
| Max Weight |
2000KG |
| Door Width |
DW=1000mm-15000mm |
| Door Height |
DW=1450-6000mm |
| Install Type |
Surface Install |
| Power Supply |
AC100V-250V |
| Frequency |
50-60Hz |
| Opening Speed |
100-500mm/s (Adjusted) |
| Closing Speed |
100-500mm/s (Adjusted) |
| Slow Down Speed |
30-100mm/s (Adjusted) |
| Open Time |
0-9s(Adjusted) |
| Closed Force F |
200N<F<800N |
| Manual Push Force |
<800N |
| Whole System Power Consumption |
<500W |
| Work Temperature |
-20ºC ~ +50ºC |
Audited Supplier 
){kind=link}
){kind=link}