G180 Heavy Type Automatic Sliding Door Operator System up to 2000KG
G180 Heavy Type Automatic Door System is the heaviest type. For the door weight up to 2000kg.
The control device of sliding automatic door contains basic function and extensional function, automatic operation/hold-open/closed/half-open to meet customer needs. Control device has multiple interfaces for choosing various connectors such as: safety beam photocell, electric locks, etc. Its drive devices adopts European technology to integrate motor with gear box, which offers strong driving and reliable operation and increased power output , it can adapt to a large door.
Features of automatic door opener G180
- Work in AC 100V-250V power supply. Low power consumption, energy saving in stand by condition.
- A highly intelligent multi-CPU control system, providing easy adjustable function and high security performance.
- Aluminum rail thickness >10mm, T5 Strength Aluminum, low noise and long operating life.
- Powerful 24V DC reared motor provides excellent thermal equipped and quiet operator. Specially-designed sealing system has good tightness, ensuring no oil leakage.
- The unique self-locking function, need not extra accessories, full function remote control device, safe and reliable.
- Safety radar, ensure safe passage.
- With high silicon rubber aluminum wheel hanger roller.
- Low noise design (<45db).
- When the power is off, can choose the backup batteries to keep the door in normal operation(optional).
- Motor soft start function, the door move more steady.
- Easy Installation: The 4.2meter length aluminum base is cut as specified, and all parts are mounted on the base at the factory.
- Five different functions with remote control function keypad: Always open, half open, exit only, lock, normal open.
Soft start: In general when the automatic door open, the motor suddenly acceleration, the door not only swing more harm, and the noise is big. We use soft start technology, the motor start slowly and soft, ensure stable running and acceleration of door body .
Auto detect: When the door body hits person body or object, it will automatic retract quickly, when detect the obstacle is clean, it will run automatically again.
System automatic self protection: When obstacle 3-6 times detected, and confirmed that person or object still has not left, the door will auto-stop, to protect the security of the clamped object and door body. After obstacle is removed, press the reset switch and the door body resumed running again.
Automatic reset: After confirming the safety of the site, there is no need to switch the power supply. As long as the door is pushed to the opening position, the door will automatically resume running.
Motor lock: Locking force > 550N
Energy saving: Use the field current, instantaneous pressure technology, when the door is not moving the motor is not charged, when the door is pulled, the motor will have field current transferred to the controller, and the controller will give a strong reverse current on the motor in 0.01 seconds.
Suspension unit
All adopt adjustable structure, hanger parts are stamping formed by cold-rolled steel sheet, surface galvanized, high strength nylon materials, surface smooth, not easy to deform, highly consistent with guide rail, running smoothly.
Controller unit
Automatic door control hub use built-in microcomputer chip to receive the sensor detection signal, and the door can be automatically adjusted and set the control process according to the measured door size and weight through programming.
Wire connecting
According to the needs of the electrical components to provide mutual connection, safe and reliable, easy to operate.
Beam for driving device
Aluminum alloy profile (thickness ≥10mm). Strength T5, long operating life, good stability, low noise.
Belt tensioning wheel unit
The constant tension belt tensioning wheel is used to adjust the belt tension.The belt constant adjustment device keeps the constant tension of the tooth belt in sync.
Belt unit
Select used the synchronous gear belt with high transmission efficiency and driven by special motor for reciprocating motion. Connected with the hanger to drive the door movement.
Independent guide rail unit
Newly designed independent guide rail device, easy to replace and repair. The dynamic beam and guide rail are interlining with high quality rubber strip, which can absorb the vibration and noise generated in the operation stably and reliably, and create a quieter operation environment.
Motor unit
The 24v 300w synchronous brush-less motor is integrated with the worm reducer.
| Feature |
Heavy Duty |
| Door Open |
Single / Double Open |
| Max Weight |
2000KG |
| Door Width |
DW=1000mm-15000mm |
| Door Height |
DW=1450-6000mm |
| Install Type |
Surface mount |
| Power Supply |
AC100V-250V |
| Frequency |
50-60Hz |
| Opening Speed |
100-500mm/s (Adjusted) |
| Closing Speed |
100-500mm/s (Adjusted) |
| Slow Down Speed |
30-100mm/s (Adjusted) |
| Open Time |
0-9s(Adjustable) |
| Closed Force F |
200N<F<800N |
| Manual Push Force |
<800N |
| Whole System Power Consumption |
<500W |
| Impact function |
Rebounding up on impact |
| Work Temperature |
-20ºC ~ +60ºC |
Details
Fix the door opening & closing position and then fix two end stop.
The door panel height could be raised and lowered through adjusting the screw
The belt could be adjusted by tightening the screw
This device prevent the door from falling down
Belt fastening device connects belt hanger. It connects the both ends of belt.
If the door panel is frame less glass door, then need glass clamp. Either 200mm type or 1000mm long type. This accessory is optional.
If the door panel is framed glass door, wooden door, aluminum door or stainless steel door, then need supporting clamp to fix door panel. Its included in one set.
The floor guide is also different for framed door or frame less glass door.
Door holder for frame less door Door holder for framed door
Parts list:
Motor
Controller
Power switch
End stopper
Belt connector
Belt
Return pulley
Connection terminal
Hanger roller bracket
Track
Microwave sensor
Company Introduction
As manufacturing factory headquartered in guangzhou, an important port city of China's foreign trade, Guangzhou CN Electrical Equipment Co., Ltd. is a high-tech enterprise which integrating R&D, Manufacturing and Trading, one of the leading and exclusive manufacturer of Automatic Partitions and Automatic Doors and the only company in China which has a dedicated manufacturing plant of electrically operated vertical lift folding partition Walls in China.
Our factory covers an area of more than 12,000 square meters. We have our products installations throughout china and abroad. The annual manufacturing capacity to 500 sets of various automatic revolving doors and 10,000 square meters of motorized partition walls, we have produced and installed Automatic Doors and Electrical Movable Walls for all types of establishments like high end residences / conference room / banquet halls in hotels / auditorium / convention centre / meeting rooms / board rooms / training rooms etc.
All the materials used are in compliance to international standards such as ISO 9001, CE, IEC etc. With the strictly control for designed, production, inspection and services by our advanced quality management system, enable the products of Guangzhou CN Electrical Device Co., Ltd selling well in the domestic market, and keep rapid growth in the European, American, Asia and Middle East market. Successfully established strategic cooperative partnership with famous domestic and foreign enterprises like Siemens, Phillips, and BEA etc.
Factory Details
Our factory is equipped with state of the art hydraulic press brake bending machines, automatic cutting machines for cutting aluminium and MDF boards and complete equipment like drilling, milling, bearing and lamination press machines, processing and manufacturing any type of doors and movable walls as per customer choice.
FAQs
Q: Are you trading company or manufacturer?
A: We are automatic door manufacturer for many years.
Q: How long is your delivery time?
A: Standard products within 10-15 days after received 50% deposit. Customized products depend on agreement.
Q: Do you provide samples ? is it free or extra?
A: Free samples can only be provided if the order is large enough. A small quantity can only be a trial order.
Q: What is your terms of payment?
A: 30% -50%deposit and balance before shipment, T/T, Western Union or Cash accepted.
){kind=link}